Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
Creality pull rod with aluminium profile for Creality Ender 3, Ender 3 Pro 3d printer.
Stable triangle structure: aluminium profile pull rod, together with high-quality metal fasteners, forms a stable triangle structure, effectively prevents the Z axis vibration, and promotes the printing effect.
Metal fixing block: The two ends are connected with metal fixing blocks to enhance stability and customer experience.Slide back and forth to make the low end in the appropriate position.
Works for the DIY 3D printer with aluminium profile.
Feeding torque is large，Product is compact and light
Strong compatibility (can used with all the filaments of 1.75mm in the market, and mainly optimized the performance of the remote printing with the flexible filament such as used for the TPU
Support remote and short-distance feeding
Using with the high-strength engineering materials injection molding products that resistant to aging
1Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer; NTC connector with terminal, easy to intall.
2Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking .
3Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly .
Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for nozzles with a diameter of 6mm, such as MK8 nozzles, E3D V5 V6 nozzles, etc. Heating block spanner only fit for V6 heat block. Allen wrench makes mounting and dismounting small screws easier.
Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
Suitable for 3D printers:------TRONXY XY-2 Pro, TRONXY XY-2 Pro Titan
Excellent Adhesion------Covered by microporous coating, shows strong adhesion in printing. Carbon-silicone construction makes models to be popped off easily after the bed cools down.
Function and use------Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
Bowden tube:outside diameter 4mm ,inside diameter 2mm ;it made of PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic,heat resistant up to 260℃
PC4-M6 bowden fitting: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm,it's made of premium copper and plastic, sturdy and durable
PC4-M10 pneumatic fitting:thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, it's made of stainless steel and plastic,High hardness and Anti-corrosion
Easy to install:connecting by the outer thread of the quick fitting
THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Dries fast and non tacky so it won't clog your nozzle with goo
LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water
NO-MESS APPLICATOR - Built in foam tip makes applying the coating to your build plate surface simple and it won't accidentally spill
ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
