SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.
EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.
IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees.
SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your outdoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
WEATHER RESISTANT DESIGN – Durable build is intended for outdoor installation and placement in the best location to minimize interference from building materials and walls. This amplifier can be mast-mounted wall-mounted or used indoors.
EASY TO INSTALL – Includes power inserter power supply zip ties (4) rubber boot (2) and clear and simple-to-read user manual and installation instructions.
IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees.
The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier
TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation
Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.
HDTV Antenna Amplifier - The Winegard Boost TV signal booster enhances any indoor non- amplified antenna, delivering more range and available channels. Delivers a crystal clear signal, watch more channels than with an antenna alone.
Amplified Clear Circuit Technology - Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation. The Boost preamplifier enhances any non-amplified antenna.
In The Box - Includes Winegard Boost LNA-100 indoor digital TV antenna amplifier, energy saving USB power cable with LED power indicator, 110V adapter and printed documentation.Gain (typical): 20 dB,Power: +5V
Winegard Boost Warranty and Support - The LNA-100 digital antenna booster comes with a 1 year parts and labor limited warranty and complimentary telephone and email support.
This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
● smart boost system with built-in adjustment dial: The SMARTPASS amplifier signal booster allows for an easier connection and delivers the correct balance reception range with just a turn of the dial. Adjustable amplifier strength and antenna’s reception power based on your location’s specific needs.
● Dual outputs: the 2-way amplifier connects to more than one device (a second TV, FM stereo or any ota-ready streaming device or Projector) simultaneously via the secondary output on the smart boost system. Makes a great complement to a media streamer.
● Professional 4G LTE Filter: the HDTV booster blocks unwanted 3G and 4G wireless signals to ensure noise-free digital TV reception and reduce picture pixelation.
● enhances FM reception: The antenna amplifier allows you to listen to your favorite radio stations.
✔LATEST 2020optimized for digital reception, significant signal enhancement technology applied for actual use, 360° design pulls in signal from all directions. Yes! Time to say no to instability or intermittence.
✔Small & lightweight saving space is never an issue for this portable powerful antenna! 6. 5ft in height with the diameter of the base tray less than 3ft. It barely takes any space unlike other bulk HDTV antenna.
✔Compatibility 13ft long standard coaxial cableideal TO use with all digital TV ready devices, flexible to position for best signal reception.
✔Easy to set upjust connect the end (f-male) of attached coaxial cable to the antenna in connector on the back of the TV or dvb-t tuner. All locations and spots to mount (on the table or wall, but a spot closest to the window is strongly recommended for the best signal reception).oaxial cable with multiple protections. Pure copper material eliminates the loose contact problem, flame retardant PC brings moisture and lightning protection. No more worry about unstable voltage burn-out.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".