This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
LONG LIFE: These Band Saw Tires are superior to factory tires, or replacement rubber or plastic tires. The value 2 pack provides excellent value and quality.
WON'T DRY OUT: Urethane doesn't dry out when compared to plastic or rubber tires. This increases their efficiency and life expectancy.
NO ADHESIVE NEEDED: Easy to install & remove with no need for adhesive. The tires stretch to fit the wheel tightly.
WIDE RANGE OF COMPATIBILITY: Fits Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0457 G0555 G0555P G0555X G0580 T21005 G1019 G1019Z, & Powermatic PWBS-14, PWBS-14CS. Any Band Saw that requires a 14" x 1" x 0.095" tire.
Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
Package: You can get two orange saw gears and a silver crowbar,and be applicable 1/2" Inch Wide by 9" Inch Diameter Band Saw Wheel
Material: The belt is made of high quality polyurethane material, which is not cracked like other rubber tires. It has a long service life and bright orange color, which is helpful for your inspection.
Easy to install: you don't need any adhesives, you can stretch them to fit your equipment, and we also provide pry bars to help you with this installation.
Unique design: special surface treatment technology makes it more skidproof than other belts. Compared with rubber tires, it can reduce machine downtime, improve production safety and extend the service life of your blade.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".