Selectline hand vacuum pump (Model No. MV8010) with 2" (50 mm) diameter gauge 4.5 oz. (135 ml) fluid reservoir bottle with fluid transfer and storage lids (7) Tapered adapters for connecting to tubing from .090" to .50" ID (2.3 mm to 13 mm) (2) Tapered manifold plugs (3) Bleed screw adapters (2) 1/4" ID x 24" long (6.4 mm ID x 610 mm long) connection tubes 5/32" ID x 1/4" ID (4 mm ID x 6.4 m ID) tubing adapter 1/4" ID x 1 1/2" long (6.4 mm ID x 40 mm long) connection tube 5/32" ID x 3" long (4 mm ID x 75 mm long) connection tube 1/4" ID x 3 5/8" long (6.4 mm ID x 90 mm long) connection tube Rubber cupped adapter
Multifunctional: The Vacuum Pump/Brake Bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations. By using some of the included accessory caps and fittings it can also be used as a brake bleeder.
Tester: Cushioned pistol grip handle with vacuum gauge, simple operation, gauge range 0-30 inches Hg, 0-760 mm Hg.
Complete kit includes accessories for both brake bleeding and automotive diagnosis. Vacuum pump set can test and diagnose a wide varity of parts and common systems on any vehicle.
Easy to use: Easily bleed brakes by yourself. Coming with a carrying bag, made by high quality material, and easy to carry.
This multi-functional vacuum pump kit can be widely used to test a variety of essential vehicle settings and operations, such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition & Heating Controls, Cruise Control Systems, Brake Systems etc., especially work for changing brake clutch fluid and power steering fluid. Use the hand pump to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
The included three differently sized black L type rubber connectors and two straight cone rubber connectors, can connect with the brake bleeder valve on any vehicles or motorcycles that use standard brake bleed valves. Use the closest sized one to ensure a tight fit. And bleed from master cylinder to wheel cylinder and caliper. There is a universal cup adapter packed in the case, can use as a vacuum sealer to match with your reusable vacuum food storage bags.
The hand pump adopts brass cylinder with a -30 to 0inHg gauge, has pressure-maintaining function and a pressure relief valve on the cylinder. The tool also uses rubber trigger cover to protect hand. The 2PCS 20"L and 2PCS 4"L transport hoses are transparent, help to observe if the waste oil is all pumped out. When you see the clear new brake oil is sucked out in the hose without any air bubble, then done.
In the hand held vacuum pump tester set, there is a 120ml / 4.5oz storage jar, which has liquid storage cover and liquid transfer cover with 2PCS O-rings for sealing. Please note, there is a connection direction request for the liquid transfer cover, connect the side marked "TO PUMP" to hand pump by short 4"L hose, if not, the waste oil may be sucked into the pump and destroy it. Do not invert the jar while using too.
PREVENT AIR FROM ENTERING YOUR BRAKE SYSTEM: The ABN | Automotive Brake Pressure Bleeder Kit includes a brake bleeder pump that allows for one-person brake fluid changes; With this brake fluid bleeder kit, there is no need to constantly watch the fluid level as you manually pump the tank and simply open the bleed valves
GET THE JOB DONE: One man brake bleeder kit includes filling and operating instructions for your convenience; The pressure from the tank reservoir constantly tops off the fluid inside the brake master cylinder and allows for one-person use; Simply fill bleeder with fresh fluid, pressurize bleeder, open bleeder valves, depressurize tank, disconnect; fill the bleeder with fresh brake fluid, attach the cap onto the brake reservoir, pump up to 10psi, and then loosen the bleeder ports one at a time
USE ON YOUR VEHICLE: 1.8-inch (45mm) master cylinder cap inside diameter (ID) with quick disconnect port for easy setup; Brake bleeder bottle is interchangeable with your existing caps to fit a wider variety of vehicles; Fits European cars including most Alfa Romeo, Audi, Bentley, BMW, Fiat, Land Rover, Lamborghini, Mercedes, Mini Cooper, Porsche, Renault, Volvo, Volkswagen, Bugatti, Chevy, Chrysler, Ford, Toyota
BUILT TO LAST: 0-70 PSI and 0-5 Bar dual gauge with 10-15 PSI (0.7-1 Bar) recommended operating pressure and 30 PSI (2 Bar) maximum working pressure; Built for rigorous use and recommended for any do-it-yourself weekend warrior as it is constructed with a strong plastic tank reservoir and aluminum plunger with spring term to pressurize your brake system
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".