True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
[1mA Sensitivity]: 1mA sensitivity when measures AC/DC current by clamp.
[Dual Line Display]: Dual line display can show both AC voltage/current and frequency or Celsius and Fahrenheit on the screen.
[Low Impedance Mode]: Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
[Activate V-Alert at Any Function]: Activate V-Alert (non-contact voltage detection) function under any function design makes non-contact voltage testing more convenient.
▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz) ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
▲Non-Contact Voltage Detection & Overload Protection - If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
▲Multifunctional & Easy to read - High-Definition Large Back-lit LCD provides better visibility in dark working area; ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Data hold function; Low battery indicator
▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use; The test leads are easy to grip; The design is Ergonomic and portable for easy use, perfect for both professional or new users
This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.
This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.
Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
Input Current: 0~100A AC; Length of Leading Wire: 1m; Two Form of Output: current output or voltage output (burden resistor needed to add); Cable Jack: 3.5mm (like a headphone jack).
Multifunctional Clamp MeterAC/DC Current amp Meter / Accurate AC/DC voltage , Frequency, Duty Cycle, Resistance, Temperature, Diode, Continuity, NCV Clamp Meter , etc. Wide Range of Applications, Ideal For Home & Professional Use, Automotive, Industrial Electrical
Ultra-clear LCD display Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
NCV Function & LPF FunctionNon-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. LPF function filters out the influence of high-frequency signal on the measurement results, so that the multimeter can measure more electrical parameters.
LoZ& LPF Function① Low Impedance (LoZ) Mode of Clamp Meter, Identify and Eliminate ghosting or Stray Voltages. ② Low Pass Filter ( LPF) of Clamp Meter, for Remove Unnecessary High Frequency Components From The Input Signal to Remove High Frequency Interference.
MULTIFUNTIONAL MEASUREMENT:The multi-function clamp meter measures AC current, resistance , diode, capacitance, AC/DC voltage, NCV non-contact induction AC voltage, and backlight display. The measurement method of AC current is to directly clamp a wire between the jaws to display the data; the measurement of resistance and diode requires electric pen and wire.
NCV INDUCTION AND POWER SUPPLY FUCTION:When the clamp meter jaws are close to the circuit, the induced voltage clamp meter will automatically detect whether there is voltage, and the alarm of the voltcraft clamp meter will give a reminder function; while pressing the "Hold" button, the dc voltage meter will emit a beam of light , So as to be used as lighting.
WIDE CLAMP HEAD:The clamp head of the current meter is designed with a diameter of 35mm. The digital clamp meter is convenient for cir cuit maintenance and wire detection under harsh conditions, without to uching or interrupting the circuit during measurement.
BRIGHT BACKLIGHT:The amp clamp meter has an LCD high-definition digital display. The backlight display function of the amp meter ac can easily read and record data in dark areas, which is very clear and brig ht, increasing work efficiency. After 15 minutes of inactivity, the dc curr ent meter will automatically enter sleep mode to save energy.
Check out our VIDEO on the left side and take a quick tour of AstroAI Multimeter! TEST A WIDE RANGE of measurements including AC/DC Voltage, AC Current, Resistance, Continuity; Also Tests Diodes.
QUALITY DESIGN features a sampling speed of 2 times per second; Auto off conserves battery life and increases the lifespan of your multimeter
CONVENIENT FEATURES included Data Hold / Max Hold and a Large, Digital LCD Display, and Extra Large Clamp make for easy use while on the job; Low Battery indication keeps unwanted surprises at bay so you never accidentally run out of juice
SAFETY FEATURE: Transformer Jaws pick up AC Current flowing through the conductor, increasing safety while improving this Multimeter’s capabilities.
▲MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
▲WITH NCV & LIVE LINE TEST FUNCTION: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
▲CONTINUITY TEST & OVERLOAD PROTECTION: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
▲EASY TO USE AND READ: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
