This cable railing kit include 32-pcs right and 32-pcs left hand thread lag screws; Kit made of T316 –stainless steel，So it can be used indoor or outdoor；
This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；
This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；
Note：Length of cable should be 1.5 inch shorter than wood post edge distance; If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended;
90 degree rectangular base hole diameter is 1 inch/25.8mm,Suitable for 1 inch outer diameter tube. Length 3.2 inch / 81.5mm, width 1.86 inch/47.3 mm , height 1.75 inch/44.4 mm ;
90 degree hand rail rectangular base cast from stainless steel 316,The surface is 100% handmade mirror polished ;
The wall thickness of the round base is 3MM, using 4 screws to install (included), there are two standard stainless steel 316 M6 screws on the side of the product, which can better fix the pipe ;
1 inch (25.8MM) rectangular base, each product undergoes 3 quality inspections: salt spray test, size inspection, surface polishing inspection. We use international standard 1" tubes for size inspection to ensure that each product can be installed normally ;
✔Material: Stainless steel T316 marine grade with high tensile strength weatherproof;High quality
✔Compatibility: Suitable for 1/8" 5/32" or 3/16" cable railing.Perfect for indoor or outdoor applications.
✔Application: Used in wood posts to protect from cable cutting the wood and decorative applications. And keep to maintain cable rail tension for preventing wire rope vibration.
✔Size: Overall Length of Sleeve: 3/4", Flange Diameter: 1/2", Required Hole Diameter: 1/4", Drill Bit Diameter: 6.5mm.
The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…
This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；
It applies to standard 1/8" inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4-6# dies is suitable;
Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch; this item include 120 Pcs 304-stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；
✅Applications: Left & Right Hand Threaded Swage Lag Screws fit for 3/16" stainless steel cable. BLIKA high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. Perfect for planning your DIY cable railing project, staircases, balconies and decking areas.
✅Material: Made of Stainless Steel T316 Marine Grade. High tensile strength and anti-fatigue strength Weatherproof, super strong resistance to rust and corrosion which make our balustrade hardware suitable for coastal installations.
✅Easy to Use: Lag Screw System is a streamline stainless steel wire balustrade systems for straight, stair or angled sections when using timber posts. To install the Lag Screw System into your timber posts, simply pass one end of the Lag Screw System through any intermediate posts and screw each Lag Screw simultaneously into your posts to create tension.
New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, and 3 drill bit. Stainless Steel T316 material, anti-rust ,water and corrosion，marine Grade, good for indoor or outdoor usage.PLS NOTE THAT, we update this tool with a free, specially made wrench from 22th, May, the earlier orders were not included wrench, contact us if you have any question.
This deck railing hardware fit 1/8" OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.
Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4); if you want to DIY a high quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended.
The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. Hydraulic crimper is needed to connect the cable to lag screws.
Material: High quality, high polished stainless steel construction.
Dimensions: Adjustable retainer arms, holds cups or cans from 5.5cm to 7.5cm diameter.
Perfect Design: Cup drink holder in unique design, it will not cause harm to the water cup due to the bumps on the road. Using the car cup holder makes it more convenient for us to drink water.
Install: Includes stainless steel mounting screw. Easily installed almost anywhere like on a table, counter top, dashboard, seatback, etc.
MATERIAL - T316 STAINLESS STEEL: LuckIn 1/8 inch steel wire was made of US ASTM standard 316 stainless steel, has strong corrosion resistance, heat resistance, low temperature strength, acid resistance and high temperature resistance, and a good welding performance.
BREAKING FORCE - 1800 POUNDS: This stainless steel wire rope structure 7 x 7, 7 groups of 7 strands braided together to form the cable. Strong enough for durable working life, minimum breaking strength 1800 pounds. Safe tension in using is 260 pounds.
CABLE CUTTER - CHROME STEEL: Cuts up to 5/32" stainless steel cable. It features hardened steel blades, thumb catch designed for one-handed operation, and contoured cushion rubber handle non-slip grips.
COMES ON A REEL - For your convenience, LuckIn wrapped the wire rope around a reel so it won't become tangled or create a mess. Use what you need and save the rest in a neat and orderly manner for your next big project.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
