10 BEST FAN HUBS for sale in 2020 – compare between the best fan hubs on sale.

RankProductRating
1
DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header
More Info Close
113 Reviews
Product Highlights
  • If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.
  • If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1 can be identified by the system.
  • Capable of connecting to 10 PC fans simultaneously for cooling the computer system.
  • Powered by a stable SATA connection to the system PSU for up to 10 fans.

$14.99
2
SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA (Newest Version)
More Info Close
1,140 Reviews
Product Highlights
  • 1-to-8 PWM connectors
  • 2200μF capacitor provides stable voltage
  • Support speed detection for accurately controlling fans
  • PWM 4pin header x 8, compatible with 3pin cable (Speed control function is unavailable for 3 pin fans. Attached 3 pin fans will run at maximum RPM).

$14.99 $14.13
3
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
More Info Close
54 Reviews
Product Highlights
  • 📣 Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
  • 📣 In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
  • 📣 For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
  • 📣 There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.

$11.99 $10.99
4
DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04
More Info Close
6 Reviews
Product Highlights
  • Support PWM function.
  • 4-Port fan hub
  • Compatible with 3-pin/4-pin fans
  • Support Cable management

$8.99
5
ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way (15.7 Inch)
More Info Close
15 Reviews
Product Highlights
  • Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
  • Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
  • Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
  • Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.

$6.99
6
Thermaltake Commander FX SATA Powered 10 Port Fan Hub AC-007-AN1NAN-A1
More Info Close
No ratings yet
Product Highlights
  • Supports 10 Independent Fans
  • Direct SATA Power Input
  • Blue LED Power Indicator
  • Included Ties/Velcro for Easy Placement

$14.99
7
DeepCool FH-10 Fan Cooling
More Info Close
6 Reviews
Product Highlights
  • Capable of connecting to 10 PC fans simultaneously for cooling the computer system
  • Modular design that allows aesthetic cable organization
  • Powered by a stable SATA connection to the system PSU for up to 10 fans
  • Each port has its own PWM function and the fan speed can be adjusted at the same time (only the speed of Fan 1 can be identified by the system.)

$14.99
8
Chassis Fan Hub CPU Cooling 10 Port 12 V Molex to PWM Connector with 4 Pin 3 Pin Efficient PC-Fan Controller System with Adhesive Tape Dedicated Supply from PSU to Link Multiple Points
More Info Close
6 Reviews
Product Highlights
  • MANAGES MULTIPLE FANS - If your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 4-pin fan speed from a single case input
  • COOLING WHEN YOU NEED IT - Quiet when you don't. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The pwm fan hub then matches the power level for the other ports
  • EASY TO INSTALL - Just plug the molex fan controller into the motherboard and connect to the PSU. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis
  • NO FRILLS, ALL FUNCTION - Strong wire connections and clean sleeving are part of our simple, cost effective design. Take care during installation to avoid bending the pins and capacitor

$10.99
9
Chassis Fan Hub CPU Cooling 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller Efficient Chassis Adhesive Computer Cooling System Dedicated Supply from PSU to Link Multiple Points
More Info Close
3 Reviews
Product Highlights
  • MANAGES MULTIPLE FANS - If your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 4-pin fan speed from a single case input
  • COOLING WHEN YOU NEED IT - Quiet when you don't. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The pwm fan hub then matches the power level for the other ports
  • EASY TO INSTALL - Just plug the SATA fan controller into the motherboard and connect to the PSU. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis
  • NO FRILLS, ALL FUNCTION - Strong wire connections and clean sleeving are part of our simple, cost effective design. Take care during installation to avoid bending the pins and capacitor

$10.99
10
YELLOW SAND SHELL 4-pin PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller | Connector with 4 Pin 3 Pin | Dedicated Supply from PSU to Link Multiple Points
More Info Close
No ratings yet
Product Highlights
  • 📣 Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
  • 📣 In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
  • 📣 For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
  • 📣 There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.

$8.99 $7.99

Trending Fan Hubs

Products & Prices Were Last Updated On

Categories: Top 10

John Carter

John Carter

John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.