This Accessory hose kit includes all the hoses required for use with a standard fresh water tank.
(1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters.
(1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump
Fits standard tanks with 1.25" water fill port and 3/8" NPT connections.
1-1/4" ID Fill Hose with Flats (3 Foot Length) - The last picture shows a 10 ft roll and does not represent shorter lengths - The length will be within +/- 3"
This 1-1/4" hose with flats is to be used with hose clamps to connect RV gravity water fill with the RV water tanks (no clamps included). The flats allow for easy clamping.
Made from ethylene copolymer (great flexibility with no kinking)
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” height x 20.5” width Average thickness 7/32” +/- (+/- .25" on each measurement) Designed to fit between the cross members of trailers
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage.
The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties
Blow-molded HDPE tanks are an integral component to all recreational vehicles
Tanks are built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association
27.7 Width x 53.5 Length x 7.5 Height Holding Tank 39 - Gallon, Blow-molded with 1 Inch Coupling
16 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs - NSF CSA Approved & BPA FREE - Fresh & Drinking Water Safe
WATER TANK MEASUREMENTS: 26” Longest Length (not including fittings) x 9” x 16” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement)
BUILT-IN FITTING: (TWO) 1½ " Dia screw in balloon fitting (threaded female - NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (TWO) ½ " Dia screw in fittings (threaded female - NPT Standard)
NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish.
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement)
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage.
NEWMAO 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # NMDP33-G30-45-12 || READ INCLUDED INSTRUCTIONS BEFORE INSTALLATION / USE
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
