10 BEST JIG ACCESSORIES for sale in 2024 – compare between the best jig accessories on sale.

Rank Product Rating
1
Jig Accessories Handles tool Adjustable Cabinet Hardware Jig Punch Locator Drill Set Aluminum with Steel Pull Drilling Templates Jig Tool for Installation of Handles,Knobs on Doors and Drawer
More Info Close
No ratings yet
Product Highlights

$24.89
2
Thin Rip Jig Table Saw Jig to Make Repetitive Narrow Strip Cuts on Table Saws and Also Works with Router Tables and Band Saws
More Info Close
91 Reviews
Product Highlights
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.

$34.99 $24.99
3
Mophorn 16-Piece Mortice Door Fitting Kit, DBB Lock Mortiser Kit with 3pcs Tungsten Steel Cutters & Accessories,Mortising Jig Tool Hole Saw Door Opener, for Wooden doors
More Info Close
No ratings yet
Product Highlights
  • 16 PIECES KIT - This 16-piece door lock mortising kit involves 1 jig kit door lock motiser with 3 cutters, 2 spanners, 1 ruler and 10 accessories. A plastic suitcase is included for easy transport
  • 3 CUTTERS - Cutters made of tungsten steel, higher quality over high-speed steel. Sizes: 20/22/25 mm (0.79/0.87/1 inch). Bigger M10 series with no distortion
  • APPLICABLE DOOR RANGE - The lock mortising kit can be used on wooden and aluminum doors with thickness under 13.5 cm (5.3 inch). Suitable for installing hotel doors, security doors and door lock modifying
  • EASY OPERATION - Applying vertical guides with height and depth stops, overrun cutting area will be avoided by using this tool set

$72.99
4
Kreg K4MS Jig Master System (K4MS)
More Info Close
No ratings yet
Product Highlights
  • Removable Drill Guide for use with benchtop and portable bases
  • Patented 3-hole drill guide allows you to make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses
  • 1/8-Inch incremental settings for materials from 1/2-Inch to 1-1/2-Inch thick
  • Dust Collection Shroud - Say goodbye to woodchips. The case is not included.

$149.99 $139.00
5
AC 12 Accessory Kit for Leigh Super 12 Dovetail Jig
More Info Close
No ratings yet
Product Highlights
  • Includes 7-piece boxed Leigh router bit set
  • Includes a vacuum and router support (VRS)
  • For Leigh super 12" dovetail jigs

$179.00
6
Coolrunner 2 in 1 Paracord Jig, Paracord Bracelet and Monkey Fist Jig Making Kit, Adjustable Length DIY Craft Paracord Tools 4' to 13' with Free Cord and Buckles
More Info Close
No ratings yet
Product Highlights
  • 2 in 1 New Design - Make Both Paracord Bracelets and Monkey Fists on the same jig! The new design paracord jig allows you to weave belts, lanyards, keychains and all sorts of essential craft products.
  • Heavy Duty Stainless Steel Material - Made from heavy duty/thick powder coated stainless steel with rubber feet to stay put while you are crafting, more solid and steady that wooden jips.
  • Adjustable Size Jig - Allow you to make paracord bracelets from 4” to 13”. Make monkey fists up to 2.5” in diameter. Trying any buckle style and size easily on the same jig now!
  • Anti-slip for Steady - Design with 4 rubber feet and come with 2 sticky gel pads to stay put while you are crafting,stop your jig from sliding or wobbling, protect your work surface from getting scratched or damaged.

$27.99
7
General Tools 850 Heavy Duty, All-In-One Aluminum Pocket Hole Jig Kit, 76 Piece Set With Carrying Case
More Info Close
No ratings yet
Product Highlights
  • COMPLETE POCKET HOLE JIG SYSTEM - Jig kit includes: pocket hole jig with clamp, #32 3/8 In. Step Drill Bit (replaceable), 3/8 in. steel stop collar, Hex wrench 6 in. square drive bit, 24 coarse square drive screws, 24 fine square drive screws, 24 wooden pocket hole plugs, Hard plastic carrying case.
  • ACCURATE- this jig creates flush, corner and angle pocket hole joints for leg-and-rail connections, building face frame cabinets, sneaking screws into tight spots, and fastening picture frames with unlimited applications
  • EASY TO USE- DIYers and expert craftsmen turn to this jig kit to build their woodworking projects. First, use the jig to drill steeply pitched counter bores in one joint member; then, drive self-tapping screws (without pilot holes) into the other member
  • VERSATILE- built to be portable or bench mounted and designed with a built-in clamping system

$30.92
8
Knife Blade Sharpening Jig Tormek SVM-45. The Knife Jig that Turns Your Tormek Sharpening System T-7, T-4, T-3, etc. into a Professional Knife Sharpener.
More Info Close
No ratings yet
Product Highlights
  • Used for Most Knives with a Width of 1-3/4-Inches
  • Longer Knives need to be Stiff
  • It can also be Used for Carver's Draw Knives
  • The Jig Rests Freely on a Universal Support

$41.00
9
DELTA 34-184 Universal-Deluxe Tenoning Jig
More Info Close
No ratings yet
Product Highlights
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots
  • Adjustable 90 degree positive stop for accurate repetitive cuts
  • 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock

$159.41
10
Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
More Info Close
No ratings yet
Product Highlights
  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do.
  • The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.

$23.24

Trending Jig Accessories

Products & Prices Were Last Updated On


John Carter

John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".