2 WAY USAGEPneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
SPEEDY EXTRACTIONFast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
NO OIL LEFT Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
Easy to UseWith FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.
4 Hose Clip Secures:Oil change pump equipped with 4 Hose Clip Secures it in place,no flow will ooze,Improve work efficiency,Rubber material is more durable than PVC transparent hose petrol resistant, avoid corrosion and it would prevent from leaking
Quick and Clean:Transfer pump for changing oil. This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes.Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W
Ideal Equipment for Oil Change:Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc
Professional Oil Cleaning Tool:The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc). Suitable for extracting oil, diesel etc from a vehicle, (never use for petrol), greatly to help your oil-cleaning task, saving time
Specificaiton: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Easy Installation: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
Ideal Equipment For : Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
WARNING: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
The 5:1 is perfect for fluid oil transfer in high volume and longer distance applications, such as truck shop service fleet facilities and in-plant applications
Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life
Few moving parts in the air motor assembly means less downtime and low repair cost
Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing
NOVEL SMALL PUMPS - portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.
QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m).
SAFE OPERATION - Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F (40℃-60℃) about 15 minutes to avoid clogging the oil pump due to oil solidification.
ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes.
For transferring Non-Corrosive, Petroleum based Fluids, of Light to Medium Viscosity - like, Motor Oils, Heavy Oil, Transmission Fluid, Heating Oils and Machine Oil, etc. , Kerosene or Diesel Fuel
Ideal for Commercial, Automotive, Farm and Industrial Applications
Fits 15 to 55 Gal. Drums (57 to 210 L) with Standard 2" (50 mm) Bung Opening
Heavy-duty Cast Iron Pump Housing. Zinc Plated, Corrosion-resistant Suction Tube
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
