★Sources for demo firmware for STM32: https://bitbucket.org/nadyrshin_ryu/st77xx_stm32/downloads/; ★Adafruit_GFX: https://www.arduinolibraries.info/libraries/adafruit-gfx-library; ★Adafruit ST77xx: https://www.arduinolibraries.info/libraries/adafruit-st7735-and-st7789-library; ★Wiki: http://www.lcdwiki.com/1.3inch_IPS_Module
1.3inch TFT LCD Screen Display Module: The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately controlled.
Dot Size: 240*240 ( There are two display way: horizontal display and vertical display, you can adjust the display direction. )
Working Voltage: 3.3V; Working temperature: -20-70℃; Interface: SPI Interface; IC Driver: ST7789; Viewing direction: IPS; Display area Size: 23.4*23.4mm; TFT Module Size: 27.78* 39.22mm
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Onboard 4x Keys; Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc..Onboard voltage translator, compatible with 3.3V/5V MCUs
5 inch HMI 480x272 industrial class TFT LCD Display & 4-wire resistance Touch Screen; Brightness 400cd/m2; LED backlight; RGB Color 65k; View Area:110.9mm*62.8mm; Visual Angle 70/70/50/70; Working life 30000 hours.
32bit Cortex-M4 200Hz CPU; CPLD EPM240 TFT-LCD Controller; 128MB (Or 1GB) Flash Memory; USB port (U-Disk) downloading; Toolbox Software for GUI design; Simple & Powerful HEX Instruction.
Basic Function: Touch screen Control / Display image / Display Text / Display Curve / Read & Write Data / Play Video & Audio. For Various Industry Field.
UART Interface RS232 / RS485 / TTL; Voltage 5V-35V; Power Consumption 1.3W; Working Temperature -20℃ / +70℃; Air Humidity 60℃ 90%.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".