Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
3 types of universal socket wrenchs cover various situations of oxygen sensor location
6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. This oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots.
QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time!
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Offset Oxygen Sensor Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.
Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.
Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire.
NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches; Each socket is permanently etched with size marking for your convenience
MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen; Sizes include 22mm (7/8”), 27mm, and 29mm; For both heated and non-heated oxygen sensors; Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions; Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires
BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity; Tools have a light coating of oil to protect them from rusting
EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
QUALITY - Constructed from drop forged heat-treated chrome-vanadium steel (CR-V) for strength and longevity; Black phosphate finish for corrosion resistance.
SIZE - Fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet.
DISIGN FEATURES- The size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires
100% Brand new and Never used This Genuine Part Is guarantee By Factory Warranty
REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: The ABN 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles
USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench (driver tools not included); Not compatible with impact tools; Use this tool in conjunction with the ABN O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included)
BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion
CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x 6PT x 90mm, 3/8 inch dr x 7/8” x 30mm, and 3/8 inch dr x 1” and 1-1/6” x 74mm
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
