DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered.
PU AIR TUBING - Length: 32.8 Feet (10M); Outer Diameter: 1/4” (6.35mm); Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI; Bursting Pressure: 360 PSI. Working Temperature: -4℉- 149℉. PU material provides the high flexible and oil resistant.
CONNECTORS - All the connectors are designed push to connect that is easy to remove and offering good sealing. The kit includes 2 Splitters, 2 Elbows, 2 Tees and 2 Unions. 4 male straight fittings fit 1/4" Tube OD and with 1/4" NPT Thread. The thread need to be seal taped to avoid leakage.
EASY TO USE - All the fittings work by simply pushing the tubing firmly into the the fitting to seal and removing the tubing is just as simple. Cutting tool is included for meeting your tube length requirements.
★PRODUCT INFORMATION:The Clamp(1/2inch(12mm), black) is made of 304 Stainless Steel,this makes clamp is sturdy, strong and reliable;And these cable clamps is cushioned and insulated by high quality rubber or silicone,this makes clamp is easier to install and provide excellent skid resistance;The width of the Steel strip is 15mm, The thickness is 0.6mm, And the aperture of the screws at both ends is M6.
★HIGH QUALITY:Because we use advanced equipment, professional production, these pipe clips oxidation resistance, moisture resistance, corrosion resistance, rust performance is better than other products.
★WIDELY USED:It Is Perfect for Mounting Varies Lines Just As the Soft Tube, Steel Tube, Aluminum Wire Line Cable,And Used in Boat/marine, Windshield, Car, UTV and Home etc.
★Complete specifications:We have provided the specifications of these pipes: 1/4inch(6mm)to 2-9/16inch(65mm) range DIA,this link size is 1/2inch(12mm) .
Diy style without diy difficulty. Included parts: (7) 1/2 inch flange; (4) 1/2 inch X 2 inch connector; (4) 1/2 inch X 1.5 inch connector;(1) 1/2 inch X 2.5 inch connector; (3) 1/2 inch cap; (7) 1/2 inch 90 degree elbow; (1) 1/2 inch X 7 inch connector；(1) 1/2 inch X 18 inch connector；(1) 1/2 inch X 24 inch connector. Installation fasteners included; Tested for durability and to resist rusting.
With Epoxy Coated，Deliberately imitation of the old paint for its added a unique classical tone.makes a great addition to any bathroom.
Powder coated finish means no mess of grease or oil to deal with before assembly. No need to paint either.
Made with high quality and durable pipe fittings. Installation fasteners included.
The Ultimate Protection and Support for Your Sewer Hose: The 10 foot Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station; It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic
Hassle Free Preparation and Setup: Conveniently ready to use straight of the box with no assembly required; Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling
Lightweight Yet Durable and Sturdy Frame: This all plastic design, creates a lightweight and weatherproof product made to last long; It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains
Designed for Simplicity and Reliability: Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps; Once sewer hose support is extended to desired length, will remain in place without creeping closed; Flexible design allows this support to curve around and avoid obstacles with ease; Easy to clean just hose it off and let air dry; Compatible with all standard 3 inch diameter sewer hoses
INCLUDES: 4” to 2 1/2” Dust Collection Hose Reducer
FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop vacuum hose branch line
PLEASE NOTE: This cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly (which would require POWERTEC 70149 or 70148 Flex Cuffs)
PREMIUM: Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".