This brake clutch oil change tool is good at exchanging brake and clutch fluid. Use 90-120PSI shop air to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
The oil filler bottle has a long screw with a valve, works with a right adapter to stuck on the brake fluid reservoir, no manual support required. The new oil will flow into reservoir as soon as open the valve, and when the lever of the oil in the reservoir reach the screw, the flow will be stop, so you do not need to keep an eye on the oil level, very convenient.
After fixing the oil fill bottle and opening the valve, connect the shop air to the waste oil bottle, and connect the black cone nipple to the vehicle bleed valve. Open the compressor, hook the waste oil bottle to the engine cover and use the trigger locker to hookup the trigger. After 4-5 mins, close the compressor and check the pressure of the pedal.
The brake system bleeder kit includes 1 1L waste oil bottle with 1.8M transparent hose, 1 0.8L new oil filler bottle, 4 plastic master cylinder adapters, 2 air quick plugs (American and European style) and 1 black cone nipple. The master cylinder adapters with size 21 - 30mm, 24 - 32mm, 28 - 37mm, 32 - 41mm, are suitable for most vehicles, such as sedan, motorcycle, truck, SUV, etc.
PNEUMATIC BRAKE OIL BLEEDING TOOL: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system.
AUTOMATIC BRAKE OIL REFILL DEVICE: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it.
ONE PERSON OPERATION DESIGN: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool.
ACCESSORIES: The brake system bleeding tool kit includes 4 master cylinder adapters for most vehicle models, 21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm. 2 types 1/4"-18NPT air quick plugs, American style and European style. 1.8M long transparent hose is good for monitoring the working situation easily, with universal black tapered nipple for connecting caliper bleeder valve threads.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
