☛ENHANCED PERFORMANCEAC 110V water pressure diaphragm pump 3.0GPM 45PSI and lift up 98 feet. The diaphragm pump retains the low power and pressure settings of the original series, and can also be used in environments that do not require large flow.
☛SELF-PRIMING Our industrial water pressure pump are self-priming up to 9.8 vertical feet, allow for usage even if located above water tank.Automatically turn on the water tap, stops when turn off the water tap.
☛SAFETY FRONT OF MINDUL 778 & CSA 22.2 Certified. This pump has a built-in adjustable pressure switch that turns on/off at 45 PSI. We ensured that our replacement pump complied with global quality and safety standards.
☛WIDELY USEDIt is the best partner for Faucet. The pump can also be used in garden sprinklers, showers, spraying pesticides, fertilizers, insect sprays.
★The Parameters of This Water PumpVoltage: 115 V, at 60 Hz. Power: 1/10 HP. Max Flow Rate: 330 GPH of discharge. Max Lift : 30 Feet. Suction Lift : more than 3 Feet.
★THIS WATER TRANSFER PUMP includes 6 feet suction hose and water suction strainer attachment as well as an additional free impeller replacement kit.
★THIS ELECTRIC WATER PUMP can remove water down to 1/8 inch of the surface when water suction strainer attachment is used. And it Must Be Filled with water in the pump head before operating.
★THIS Utility Pump works efficiently for removing water from aquariums, clogged sinks, soggy basement, rain barrel, water beds, outdoor ponds and swimming pools. And It Can also be used for watering lawns and gardens, washing machines, washing cars or other water requirements in your house.
►AUTOMATIC ON/OFF ELECERIC SUBMERSIBLE WATER PUMP◀ Turns the pump on and off by integrated float switch. It has automatic and manual mode for you to use it with different environment. When you swtich to automatic mode, the pump can be left unattended, as long as the pump is plugged in. Mini Wate Sucking Level with Automatic Control 3 inch, Mini Wate Sucking Level with Manual Control 1 inch.
►POWERFUL & DURABLE◀ 1/2 HP, COPPER MOTOR, THERMAL PROTECTION AND UPGRADED SEAL STRUCTURE will ensure effective pumping and longer life.
►STRONG AND RELIABLE PERFORMANCE◀ The pump has maximum capacity of transferring up to 2200 GPH and max lift water up to 23ft.
►MULTIPLE FITTINGS◀ Each pump equiped with three adapters, which allow to connect discharge hose either with thread directly or clamp, including thread GHT 3/4" for standard garden hose, NPT 1", and G1.5".
⭐ 2020 NEW 7/8" SHAFT VERTICAL PUMP - Direct drive vertical axial pump fits most vertical shaft power washer: Troy Bilt, Generac, Briggs & Stratton, Craftsman, Simpson, Ryobi, Karcher, HondaGCV135, GXV140, GCV160, Blackmax, Devilbiss/Excell, Husky, Powerstroke and many other vertical engines at 5.5 ~ 6hp (170 ~ 200cc), work great at a wide range from 2000 to 2700 PSI. NOTE: This pump won't necessarily fit every model, Please check the installation dimensions.
⭐ EASY START - Come With Thermal Relief Valve(Made in the USA), Chemical Injection, Unloader, and SAE gas engine flange. Built-in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting the engine, set up in 5-10 minutes!
⭐ NEW DESIGN & OEM PROCESS -①Thermal relief protection to prevent pump overheating. ②Double seal system prevents water leaks. ③Dual oversized radial ball bearings for better wear resistance. ④Precision polished stainless steel pistons for extended seal life. ⑤The fully anodized die-cast aluminum crankcase for rust protection, prevent lube failure. ⑥Anodic Oxidation Surface Treatment - Improve rust resistance, enhance wear resistance and hardness, protect metal surfaces.
⭐ 150 HOURS RUNNING TIME- Most pressure washer pumps only have a service life of 60~80 hours, Yamatic made it of Upgraded 50% running time durable design, could support your home working weekly for about 3 years.
☞High PerformanceAC 110V industrial water pressure pump, 3.0GPM 55PSI and lift up 98 feet. The diaphragm pump retains the large power and pressure settings of the original series, and can also be used in environments that do not require large flow.
☞Self PrimingThe water pressure pump pressure pump are self-priming up to 9.8 vertical feet, allow for usage even if located above water tank. Automatically turn on the water tap, stops when turn off the water tap.
☞Safety Front of MindObtained UL 778 & CSA 22.2 Certified. Our diaphragm pump has automatic demand, built-in 55PSI pressure switch automatically starts and stops the pump when necessary. We ensured that our replacement pump complied with global quality and safety standards.
☞Widely ApplicationDC HOUSE self priming pump are suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment. It is worth having.
Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
1/2" Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
Power source: DC 12V(Comes with a AC 110v to DC 12v power adapter), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
Max circulating water temperature: 100°C/212°F. It's submersible but can't be immersed in hot water exceeding 50°C/122℉
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
