STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
Hide your IR remote controlled devices completely out of sight! In another room, in the cabinet or wherever you can imagine!
Does your remote control stop working if your cable box is 20' away but you want to put the cable box downstairs? Not a problem with our wireless remote control extender!
Suitable for most homes 3-5,000 SQFT or less. Our wireless IR extender can span 50-300ft, depending on your homes contstruction which can reduce the distance it may span.
Sit and change channels on the cable box while the box is in the basement and your upstairs.
NOTE Some devices us RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices.
10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another
Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet
Known compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M
IR REMOTE CONTROL cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
HOME THEATER ACCESSORY repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
SIMPLE INSTALLATION of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
USB POWERED IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
High sensitivity: Remote control signal receiving real-time response to fast forward without delay
Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
Easy Setup: This IR Repeater System is easy to use and sets up in minutes
High sensitivity: Remote control signal receiving real-time response to fast forward without delay
Easy Setup: This IR Repeater System is easy to use and sets up in minutes
5V USB Power Supply(Adapter not included)
Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the lbox is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box. The box will reboot.All units are bench tested and working before leaving the factory.
Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola,Arris, and DTA Set Top Boxes Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43i tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
★★With 1 IR distribution block,1 receiver which picks up the signal from the remote controller, the receiver is with a convenient IR confirmation LED .Small and easy to hide,high sensitivity,broadband remote control.
★★Suitable for most IR control devices,such as:Amplifier,Cable box,DVD Player,CD Player,Blu-ray player,Stereo receiver ,Satellite TV receiver and so on.PLEASE NOTE, DOES NOT WORK WITH: Cisco RNG150 RNG150N & RNG250 & Marantz devices.
★★With 6 emitters which is used to send the signals to the A/V components,Kit controls up to 8 devices - Expandable to 12 devices (Additional IR emitters sold separately)
★★12V DC Power Supply(INPUT 100-240VAC,50/60Hz),34-60kHz operating range,3.5mm mini plug.Easy to use,Control all same devices by one click ,it needn't turn the contriller to all directions.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
