The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4” x 3/8” with a 1/8” “T” slot (with slight variances from brand to brand) running the length on the bottom of the slot.
This part is compatible with models including; 34-710,34-440 (90C12580 THRU 95H98459),34-440 (88J00000),34-440 (95H98460 & HIGHER),34-440 (SN88J00001 THRU 90C12579)
This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 34-895,422-04-004-0001,50-864,34-928
Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
This miter gauge assembly (part number 34-929) is for table saws
Quickly set-up, tune up, and check the accuracy of your shop's tools with this system.
Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire.
The A-LIGN-IT deluxe kit dial indicator reads in .001" of an inch increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot.
Dial indicator mounting bar measures 3/4” x 3/4” x 11". Also includes a planer bar, and a precision 1/2" x 3-3/8" pin for drill press and router tests. Special spring and arbor nut to test saw blade and arbor run-out, 22 piece tip set for the dial indicator to meet any application.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
