Premium 25-foot chiller made with 3/8-inch OD USA Copper tubing
2x4-foot lengths of 3/8-inch vinyl tubing
Strong stainless steel hose clamps. Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.
Heavy-duty lead free female garden hose fitting (USA made)
The copper brother to our customer favorite Silver Serpent, the sleek Copperhead 25-foot copper immersion wort chiller is the fast way to cool your wort to pitching temps!
No need to sanitize. Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go.
Brew with peace of mind like never before. Drop-angle connections provide insurance against contamination. Surprise leaks stay outside your kettle and away from cooling wort.
Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source.
CHILLS WORT IN MINUTES!MRbrew 20-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Gone for you are the days of an immension chiller that takes hours!
HIGHLY SAVE YOUR WALLETThis super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates!
NO LEAKS & RUST-FREEThis wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust, can withstand -321F to 392F. Do remember to clean the inlets and outlets to remove metal debris before use!
GREAT UPGRADEThe chiller connection ports are all 1/2" male NPT quick disconnect fittings. It has a tremendously low restriction, which makes it ideal for working with a pump to do gravity transferring. Working with a pump will increase flow rates through the chiller, allow for more mounting options and add the ultimate flexibility during the brew day!
EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water.
USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo)
READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included)
5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!
A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort.
Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required.
Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings.
John Carter is the owner and CEO of AcedProducts.co—a popular online website that analyzes tens of thousands of reviews on various products to show you the bestsellers in any category. His goal is to make online shopping much easier than it's ever been by eliminating the need to guess which products are good and which ones are bad.
"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".
